Pool Deck Resurfacing & Patio Coatings in Richmond, VA

Who this is for

This service is for homeowners with a concrete patio or pool deck that's worn, slippery when wet, stained, or just due for a refresh. It also fits anyone wanting a cooler, more comfortable surface to walk on barefoot around a pool through the summer.

What patios and pool decks deal with

• Constant sun exposure, which fades and breaks down unprotected concrete and coatings over time
• Chlorine and pool water splashed onto the surrounding deck day after day
• Bare feet, which make slip resistance and surface temperature more important than they are indoors

Repairing the concrete first

Outdoor slabs around pools and patios often have cracking, spalling or settled spots from years of weather and ground movement. We repair these before coating or resurfacing so the finished surface is sound and even, rather than coating over problems that will show through later.

Covered patios vs. open patios and decks

A covered patio is shielded from direct rain and most UV exposure, so it deals with less weathering than an open patio or pool deck that sits in full sun and gets rained on directly. We factor this into which coating and finish makes sense, since a fully exposed deck needs a system built to handle sun and water head-on.

Steps, coping and pool edges

The areas right around pool steps, ladders and coping see the most repeated wet foot traffic on the whole deck, so we pay extra attention to texture and coverage in those spots during installation rather than treating the whole deck as one uniform zone.

Slip resistance and comfort underfoot

Everyday upkeep

• Rinse off leaves, pollen and dirt regularly so they don't grind into the surface underfoot
• Hose down chlorine splash and pool chemicals rather than letting them sit and dry on the deck
• Use a soft-bristle broom or mop for routine cleaning instead of abrasive tools
• Keep an eye on joints and edges each season for cracking that should be addressed before it spreads

Expansion joints around pools

Pool decks typically have an expansion joint between the deck and the pool coping to let the two surfaces move independently. We check this joint during the estimate and reseal it as part of the job where needed, since a failed joint here lets water get underneath the deck surface.

A covered patio sees less direct sun and rain than an open deck, so during the estimate we'll also talk through whether a lighter system makes sense for a covered space versus the full outdoor-rated coating an open deck needs.

Process

• Clean and profile the existing concrete
• Repair cracks and spalled areas
• Apply an outdoor-rated coating or resurfacing layer
• Add slip-resistant texture to wet-traffic areas
• Finish with a sealer or topcoat suited to sun exposure

Schedule before pool season

Outdoor coatings need dry weather and suitable temperatures to cure properly, so we schedule around the forecast. For pool decks, it's worth planning the work before you open the pool for the season rather than waiting until the deck is already in daily use and harder to work around.

How long it takes

Timeline depends on the size of the patio or deck, how much repair is needed, and the weather during the job. Because the work is weather-dependent, rain or cold can push the schedule back, and we'll keep you updated if that happens so you can plan around the pool or outdoor season.

What it costs

Patio and pool deck work is priced per project after a free on-site estimate, since size, condition, and the texture and sealer you choose all affect the price. See our cost guide for how we quote work, or reach out through contact to schedule a visit.

Frequently Asked Questions